The stone plastic elevator door cover with good quality is used in the elevator cover decoration. It has the characteristics of uniform design and color, reasonable and moderate price, no radiation and convenient construction. It can be pasted with structural glue or glass glue in the installation. These auxiliary materials are common in the market and the price is not high. Because the base material is solid, there is no need to worry about easy breakage and frequent replenishment.

反之便宜，質量差一些pvc發泡材質門套線相對來說比較脆弱缺乏韌性不易安裝。這種材質表面與石塑電梯門套沒有太大差別，但是他的成分和壽命都遠不如石塑電梯門套，不到三個月就會造成斷裂變形，頻繁補貨，售后麻煩，造成得不償失的結果。

On the contrary, the price is cheap and the quality is poor. Some PVC foam door pocket lines are relatively fragile, lack toughness and difficult to install. The surface of this material is not much different from the stone plastic elevator door pocket, but its composition and service life are far inferior to the stone plastic elevator door pocket. It will cause fracture and deformation, frequent replenishment and after-sales trouble in less than three months, resulting in the result that the gains outweigh the losses.

石塑電梯門套是包裹墻體的裝飾線條，主要包括石塑線條和石塑側板兩部分。現在市面上可以用于電梯套的主要制作材質有仿石材，大理石，不銹鋼、木塑、密度板、原木、石膏、鎂鋁合金等。不論那種材質，在這個多元化的市場上，都有不同的檔次和不同的，石塑電梯門套作為一種性?xún)r(jià)比較高的選擇，也是需要我們認真考量的。

Stone plastic elevator door pocket is a decorative line wrapped around the wall, mainly including stone plastic line and stone plastic side plate. At present, the main materials that can be used for elevator sleeves on the market are imitation stone, marble, stainless steel, wood plastic, density board, log, gypsum, magnesium aluminum alloy, etc. No matter what kind of material, in this diversified market, there are different grades and prices. As a cost-effective choice, stone plastic elevator door pocket also needs our careful consideration.

裝配式電梯門套是頻繁使用的一種產品，但是由于使用不當?shù)仍颍苋菀自斐砂l(fā)霉的現象，嚴重影響其門套的使用，所以就需要我們?cè)敿?xì)了解，門套處置發霉現象的方法，以便更好的進行。

Assembled elevator door pocket is a frequently used product, but due to improper use and other reasons, it is easy to cause moldy phenomenon and seriously affect the use of door pocket. Therefore, we need to know in detail the methods of handling moldy phenomenon of door pocket, so as to better solve it.

一：電梯套的細木工板與墻面接觸的中間刷清漆，多刷幾道，這樣一來可以擋住從墻體傳到門套的水汽。

1： The middle of the contact between the joinery board of the elevator sleeve and the wall shall be painted with varnish and painted several more times, so as to block the water vapor from the wall to the door pocket.

二：如果衛生間不設門檻石，從表面辨別品質好的仿大理石電梯門套那么電梯門套要和空中空出一段距離，裝配式電梯門套這樣就可以擋住從衛生間空中滲入門套的水汽。

2： If there is no threshold stone in the bathroom and the imitation marble elevator door pocket with good quality is identified from the surface, the elevator door pocket should be free from the air. The assembled elevator door pocket can block the water vapor penetrating into the door pocket from the bathroom air.

三：靠衛生間一面的門套線選擇用瓷磚，石材，這些材料外觀漂亮且不怕水。

3： The door pocket line on one side of the bathroom is made of ceramic tiles and stones. These materials have a beautiful appearance and are not afraid of water.

四：在門板的背面貼上一層防火板，這樣可以擋住室內向電梯門套滲入的水汽。

4： A layer of fireproof board is pasted on the back of the door panel, which can block the indoor water vapor penetrating into the elevator door pocket.

在裝配式電梯門套的發霉處置上，具體可參考上述這四種方法進行，從而更好的保證產品的使用，減少損壞情況。

The moldy disposal of assembled elevator door pocket can refer to the above four methods, so as to better ensure the use of products and reduce damage.